Olympia Chimney Chimney Sweep Nationwide

Olympia Chimney Chimney Sweep in Marietta: What to Know First

An Olympia Chimney chimney sweep in Marietta typically costs $189 – $329 for a standard cleaning with a Level 1 inspection included, and most jobs are completed in 60 – 90 minutes from setup to final walkthrough. We’re an independent Olympia Chimney service provider, which means we work on these systems every week but we’re not bound by manufacturer service-center pricing or parts markups. If you own an Olympia Chimney fireplace, insert, or venting system and you can’t remember the last time it was swept, this page will tell you exactly what we look for, what it costs, and what actually needs to be done. Call (229) 350-8952 and a live person will answer, day or night.

Call (229) 350-8952

How Olympia Chimney Products Fail – and How We Fix Them

Olympia Chimney builds solid equipment, but every brand has patterns. Here’s what we see most often on Olympia systems in Marietta homes, and how we address each one during a sweep.

• Galvanized flue sections on the Olympia Ventis line that corrode at the seam. Marietta’s summer humidity collects inside unlined masonry chimneys, and when that moisture meets a galvanized seam, you get rust bloom at the joint. We spot this early during a sweep, wire-brush the affected area, and tell you honestly whether it’s cosmetic or structural. Most of the time it’s something we monitor, not something you need to replace tomorrow.
• Creosote loading behind the Olympia baffle plate. The baffle on Olympia’s wood-burning units does a good job of forcing smoke back toward the fire for secondary burn, but that same design traps creosote where you can’t see it from the living room. This is the number one reason Olympia owners think their chimney is cleaner than it is. We remove the baffle during every sweep and show you what came out from behind it.
• Gasket compression on Olympia door systems that lets smoke seep into the room. After a few seasons of heat cycling, the rope gasket around an Olympia door loses its loft. The symptom you’ll notice is a faint smoky smell in the house on cold mornings when the fireplace isn’t running. We check gasket compression during the sweep and can replace it with OEM-spec material on the spot if it’s flattened.
• Damper plate warping on older Olympia Ventis models. The cast damper plate sits directly in the heat path, and after years of use it can warp just enough to let air flow when the fireplace is idle. That means cold drafts in winter and conditioned air leaking out in summer. A warped damper is replaceable, and we’ll show you the gap before we recommend anything.
• Slate and masonry settling on the chimney crown above Olympia factory-built systems. In older Marietta neighborhoods around the Square, chimney crowns crack as the clay soil expands and contracts through wet-dry cycles. Water enters the chase, runs down into the Olympia unit, and causes rust at the firebox flange. We check crown condition and the chase top during your sweep, because the problem almost always starts up top, not in the firebox.

Our Olympia Chimney Chimney Sweep Process

Here’s the exact sequence of a typical Olympia Chimney sweep with Alcott Chimney Marietta, from first call to the moment we leave.

1. 1
   You call (229) 350-8952. A live person answers, asks what you’re seeing or smelling, and books a window that works for you. You’ll know the technician’s name and see their photo before we arrive.
2. 2
   We lay down drop cloths, run a HEPA-filtered dust containment system, and do a visual check of the firebox, damper, and chimney exterior before any sweeping starts.
3. 3
   We run rotary sweeping rods through the entire flue, removing creosote and soot down to the smoke shelf. This includes pulling the Olympia baffle plate so we can clean behind it.
4. 4
   We inspect every accessible component: gaskets, damper, baffle, chase top, crown, and flashing. If we find a part that’s worn, we show you the problem with a camera before we discuss replacement options.
5. 5
   If a repair is needed, you get a written price before any work begins. When parts are required, we use OEM-spec components or professional trade brands like DuraFlex and HeatShield, never box-store substitutes.
6. 6
   We finish with a Level 1 or Level 2 inspection, depending on what your Olympia system needs, then clean up and walk you through everything we found. Every repair carries a written guarantee, and if it fails within the coverage period, the second visit is free.

What Olympia Chimney Chimney Sweep Costs in Marietta

A standard Olympia Chimney sweep in Marietta runs $189 – $329, and that includes the Level 1 inspection and full cleanup. Here’s what changes the number:

• Flue condition: Heavy glazed creosote takes longer to remove than light soot. We’ll tell you if your buildup is pushing into the upper price range before we start.
• Access: Most Marietta homes have straightforward roof or chase-top access. Steep pitches or hard-to-reach chase tops on split-level homes add a modest access fee.
• Parts found during the sweep: A worn gasket or warped damper is a separate line item, always quoted in writing before we touch it. You’ll never get a surprise charge at the end.

Call (229) 350-8952 for an exact quote on your Olympia Chimney system. Estimates are free, and the price we quote is the price you pay.

Why Marietta Homeowners Call Alcott Chimney Marietta for Olympia Chimney Work

Ruben Castellano and our crew have spent years serving Marietta homeowners, including plenty of jobs in the historic Kennesaw Avenue corridor near Marietta Square, where older chimneys hide problems that newer construction never sees. We compete on certainty, not just price. Every technician who shows up at your door is background-checked and identity-verified under the Threshold Standard, and you’ll know their name and see their photo before they arrive. Every job gets a written price before work starts and a written guarantee on every repair. If a repair fails within the coverage period, the second visit is free. That’s the 365-Day Done Right Promise, and it applies to every Olympia Chimney job we complete. We also carry the professional trade brands that Olympia systems often need when it’s time for parts: DuraFlex liner systems, HeatShield resurfacing, and Gelco sealants. Tell me what you’re seeing and I’ll tell you exactly what it means, no guesswork, no upsell.

FAQs