Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Olympia Chimney Chimney Inspection in Marietta: What to Know First
An Olympia Chimney chimney inspection in Marietta typically runs $149 – $349 for a Level 1 or Level 2 inspection, and most appointments are completed within 90 minutes. We’re an independent Olympia Chimney service provider, which means we inspect and service these units regularly without being tied to any manufacturer’s sales agenda. If you own an Olympia fireplace or chimney system and haven’t had it inspected in the past year, call (229) 350-8952 and we’ll give you a straight answer on what it needs.
This page is for Marietta homeowners who want to know exactly what’s happening inside their Olympia chimney before spending a dollar on repairs. We’ll walk through the failure points specific to Olympia equipment, what an inspection actually covers, and what you can expect to pay.
How Olympia Chimney Products Fail – and How We Find It
Olympia Chimney builds solid equipment, but every brand has its weak points. Here’s what we see most in Marietta homes, based on years of hands-on inspection work:
- Ventis flue liner separation at the mid-joint. The Ventis double-wall liner system uses a mechanical locking ring at each joint. When a firebox gets over-fired or the chimney takes a hard thermal cycle, those joints can shift. We’ve opened up Ventis systems in East Cobb and Kennesaw Avenue homes where the inner liner had pulled apart by a quarter inch, letting flue gas into the insulation cavity. A camera inspection catches this in minutes; a visual-only check misses it.
- Refractory panel cracking in the Olympia zero-clearance firebox. Olympia’s factory-built fireplaces rely on refractory panels that mimic masonry. After 8 – 12 years of regular use in Georgia’s damp winters, those panels often crack along the side seams. The crack itself isn’t always urgent, but it exposes the metal firebox behind it to direct flame. We document panel condition in every inspection and tell you plainly whether it’s cosmetic or structural.
- Rain cap and termination cap rust-through on Ventis Class A pipe. The galvanized caps Olympia ships as standard equipment hold up okay in dry climates. Marietta’s summer humidity and frequent thunderstorms accelerate rust at the cap’s weld points. We regularly replace termination caps on Ventis systems that are only 6 or 7 years old. It’s a $200 – $400 fix, and catching it early prevents water from running down the flue and into the firebox.
- Damper linkage wear on older Olympia factory-built models. The cast-iron damper plate on 2000s-era Olympia units rides on a pivot pin that gets brittle with heat. When that pin snaps, the damper won’t close all the way, which pulls conditioned air out of your house all winter. The part is still available, and it’s a straightforward repair on most units we see in the Marietta Square historic district.
- Creosote accumulation in offset flue runs. Olympia installations with two or more offsets (common in ranch homes with shallow roof pitches around Kennesaw Mountain) create turbulence zones where creosote builds faster than straight runs. We flag this in our inspection reports so you know which sections need more frequent sweeping, typically every 6 months instead of annually if you burn wood regularly.
Styles & brands we work with
Our Olympia Chimney Chimney Inspection Process
Here’s exactly what happens when you call us for an Olympia Chimney inspection in Marietta:
- 1
You call (229) 350-8952. A live person answers, day or night. We ask about your Olympia unit’s age, fuel type, and any symptoms you’ve noticed. You get a written price before we ever schedule a truck.
- 2
We identify the unit and check maintenance history. On site, we confirm the Olympia model and configuration before touching anything. We look for evidence of previous work, skipped sweeps, or DIY repairs that may have introduced problems.
- 3
Level 1 or Level 2 inspection, per your situation. If you’ve had annual maintenance and nothing has changed, a Level 1 may be all you need. If you just bought the home, changed fuel type, or had a chimney event, we go straight to Level 2 with a full camera scan of the flue.
- 4
Camera inspection of the flue and firebox. We run a high-resolution camera from the firebox to the termination cap, documenting every joint, offset, and liner seam. You see the footage. If we find a crack, separation, or blockage, we show you the image and explain what it means in plain English. We use OEM Olympia parts when the unit’s warranty is still active, and quality aftermarket equivalents when it’s not.
- 5
Written report with photos and a repair plan. You receive a documented inspection report with photos, findings, and a priority-ranked list of any recommended work. If nothing is urgent, we say so. We don’t invent problems to fill a work order.
- 6
Repair, test, and guarantee. If you approve repairs, we do the work, test the unit for proper draft and operation, and hand you a written guarantee. Every repair we make is covered, and if it fails within the coverage period, the second visit is free.
See the difference
Before
After
Before
After
Before
AfterWhat Olympia Chimney Chimney Inspection Costs in Marietta
A Level 1 inspection on an Olympia unit typically runs $149 – $199. A Level 2 inspection with full camera scan falls between $249 and $349, depending on flue height and access. If we find damage that requires repair, common fixes land in these ranges:
- Termination cap replacement: $200 – $400 for Ventis Class A compatible caps
- Refractory panel replacement: $350 – $700 per panel including labor and materials
- Damper repair or replacement: $180 – $450 depending on the Olympia model and damper type
- Flue joint resealing (camera-verified): $300 – $600 for typical Ventis liner runs
What moves the price: flue height, roof pitch, the number of offsets, whether we need to remove any chase covers, and whether OEM parts are needed for warranty compliance. We give you a written price before any work starts, always. Call (229) 350-8952 for a free estimate on your Olympia inspection.
Why Marietta Homeowners Call Alcott Chimney Marietta for Olympia Chimney Work
Most chimney companies in Cobb County will say they can inspect any brand. The difference is what happens when we find something. Our techs know Olympia equipment well enough to tell you whether a crack in a refractory panel is a real problem or just a cosmetic line that’ll look the same for another five years. We don’t upsell you on work you don’t need. Every repair is backed by our 365-Day Done Right Promise, in writing. If the repair fails within a year, the second visit is free. You’ll know your technician’s name and see their photo before we arrive. Every Alcott tech is background-checked and identity-verified under the Threshold Standard, and required to show a photo ID badge at the door. We work with professional trade materials across all major brands, including DuraFlex, HeatShield, and Gelco as backup systems for Olympia units, so if a recommended fix crosses into another manufacturer’s territory, we’re not stuck guessing. We’ve been serving Marietta since 2002, and Ruben Castellano has spent more than a decade doing chimney inspections and repairs here, including plenty of work in the historic Kennesaw Avenue corridor where older home configurations make Olympia installations more challenging. Tell me what you’re seeing and we’ll tell you exactly what it means, no guesswork, no upsell.
FAQs
Olympia Chimney warranties generally cover manufacturing defects in the fireplace or chimney components, not routine inspection, cleaning, or wear-related failures. If your unit is still under warranty, we’ll identify whether a found issue qualifies for a claim and use OEM Olympia parts to keep it valid. Most Marietta homes we service have units that are 10 – 20 years old and well past manufacturer coverage.
Once a year, regardless of how much you use it. Marietta’s humidity accelerates rust on metal components, and the thermal cycles from Georgia’s cold snaps followed by warm days cause expansion and contraction at flue joints. If you burn wood more than twice a week, we recommend a Level 2 inspection every other year. Call (229) 350-8952 to schedule, and we’ll get you on the calendar without a callback queue.
If the firebox itself is cracked or rusted through, replacement is usually the honest answer: repairing a failed firebox costs more than the unit’s remaining life is worth. But if the problem is a flue joint, damper, refractory panel, or termination cap, repair typically costs 20 – 40% of a new installation and can add 10 – 15 years of service. We’ll show you the camera footage and let you make the call with real numbers in front of you.
A Level 1 inspection takes 45 – 60 minutes. A Level 2 with full camera documentation runs 60 – 90 minutes. If repairs are approved the same day, we can often complete common fixes like cap replacement or damper repair during the same visit. We give you a written time estimate when you book, and we stick to it.
Yes. Real estate transactions are one of the most common reasons we do Level 2 inspections in the Marietta area. We document the condition of the flue, firebox, damper, cap, and all accessible joints, then provide a report you can take to the negotiating table. If the seller’s disclosure says the chimney was recently serviced, we’ll verify that claim with camera evidence. Call (229) 350-8952 and tell us the property address; we’ll confirm availability and give you a written price for the inspection.
Written by Ruben Castellano, Owner, Alcott Chimney Marietta, serving Marietta and nearby areas.